Facial detection and location based on skin color and eye characteristic

This paper comes true a system of facial detection and location. Firstly, it realizes the facial detection of candidate region used skin color for the given image, and considers the influence of similar skin. Secondly, it realizes the location for eye region used the gray characteristic of eye and correction of central measurement, and makes further selection for facial candidate region. The end, it normalizes the facial image and makes it as front standard image, so realizes the facial characteristic location.     

火焰原子吸收光谱法测量污水中锑量的测量不确定度评定

通过火焰原子吸收光谱法对水中的锑量进行了测定,对影响测量结果的不确定度分量进行了量化的计算,从而得出影响锑量测量不确定的主要因素是测量样品消解液中的锑的质量浓度引起的不确定度.     

加热炉烟气在线自动测氧技术的研究

介绍了武钢热轧厂烟气中残氧量自动监测技术及燃烧工艺试验 ,评述该项技术研究动态 ,指出它对节能降耗和环境保护的作用     

维氏硬度检测中不确定度初探

通过分析维氏硬度检测中的不确定度，计算了各不确定度分量所占的权重，得到HVlO(440--738)范围内的相对不确定度为1．3％--1．7％。     

高精度智能转速测量模板的设计

介绍了一种利用高性能的16位单片机80C196KC进行转速实时高精度的测量方法，阐述了如何通过CAN总线实现与微机通讯；详细描述了硬件电路的设计，并给出了软件程序框图。     

六通道瞬态光学高温计

六通道瞬态光学高温计是在可见光和近红外光谱范围内 ,把光源的热辐射取出六个波段进行测量。每个波段信号通过各自的光纤传输、光电倍增管探测和记录仪器记录。系统的时间分辨率小于 30 ns,冲击温度测量范围为 2 30 0～ 90 0 0 K,测量误差小于 5 % ,给出了以碘化钠、硝基甲烷和空气为样品的若干实验结果     

BC—1型白平衡仪的原理与实践

ＢＣ－１型白平衡仪是一种光电积分式测色仪器，它通过颜色传感器获取屏幕的红，绿，蓝三条色信号，与预先存储在仪器中的标准信号值相比较通过ＬＥＤ条形显示器显示两者之偏差，用以直接指导彩电生产线的白平衡调整，仪器采用Ｉｎｔｅｌ１８０９８单片微机为系统核心，内藏信号发生器，仪器可任选红，绿，蓝作为基准色，具有基色亮度自动调整功能，该仪器的定标方法简单，快捷，可方便地存储８套基准白场标准数据，该仪器已可靠在应     

组合式光纤流量传感器

提出了一种新型的组合式光纤流量传感器，介绍了它的工作原理，详细讨论了光脉冲转换器的设计要点，据此设计了传感头，并给出了它的实验结果。     

用于水下三维视觉传感的新型空间差频扫描测量法

激光扫描三角法是近十年发展起来的三维传感新技术,其实现扫描测量的方法可分为两类:一是采用阵列器件,用相应的同步扫描机构实现;另一则采用单通道器件,由扫描装置进行步进扫描实现。虽然这种技术在陆地及空气系统中已得到广泛应用,但在水下却存在着许多问题。本文提出了一种新型空间差频扫描测量方式,并对扫描测量原理、测量周期、分辨率及速率进行了深入讨论,最后的应用结果显示了这种新型方式用于水下三维传感的特殊优越性。     

A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.